Watch the Original Review
Japanese aviation creator キャプテン ジョー CAPTAIN JOE evaluates the panel from an airline pilot’s perspective and demonstrates how physical overhead controls can support both normal and non-normal A320 procedures.
Most hardware reviews begin with specifications. This one begins with operational memory. CAPTAIN JOE—who previously flew the Airbus A320 as a captain—looked at the Rowsfire A107 Pro not only as a flight simmer, but as someone who once reached overhead to operate the real aircraft’s electrical, fuel, lighting, air-conditioning and fire-protection systems.
His review asked a more useful question than whether the panel simply works: does a compact home-simulator overhead preserve the controls, response and procedural value that matter most to an A320 pilot?
Compact hardware with real procedural value.
CAPTAIN JOE’s strongest endorsement was not about appearance. It was about being able to perform preflight preparation and an engine-fire response through physical controls instead of repeatedly moving the simulator camera and clicking with a mouse.
He considered the A107 Pro especially relevant for serious A320 simulation, home-cockpit builders and pilots who want to develop overhead-panel location memory.
Rowsfire A107 Pro A320 Overhead Panel
The compact panel brings frequently used A320 overhead functions into physical reach for normal procedures, simulator flights and non-normal scenarios.
View A107 Pro DetailsA Full Overhead Concept Condensed for a Desk
At 40.5 cm wide and 27 cm tall, the A107 Pro was more compact than CAPTAIN JOE expected—approximately the footprint of two A4 sheets placed side by side. He contrasted this with the real A320 overhead, which occupies much of the cockpit ceiling.
The panel uses a 4 mm acrylic front plate and an aluminum frame. He found the structure solid and substantial, while noting that the glossy front surface differs from the matte appearance of the real aircraft. The controls are also smaller than their full-size counterparts, but he considered their scale practical and easy to operate in a home simulator.
How Closely Does It Represent the A320 Overhead?
Former captain’s comparisonWhy the Hydraulic Section Is Reduced
The largest difference identified by CAPTAIN JOE was the missing full hydraulic panel normally positioned between the fuel and electrical sections. On the real aircraft, that area manages systems connected to landing gear, steering and brakes.
Rowsfire explained that this was a size-versus-function decision. The review also put the omission into operational context: pilots do not frequently manipulate most hydraulic controls during routine flights, although they may become relevant in non-normal situations.
CAPTAIN JOE viewed the omission as noticeable, but potentially a sensible compromise for a panel designed to remain desk-friendly.
Fast Synchronization with the Virtual Cockpit
The creator tested external power, fuel pumps, APU controls, ADIRS and fire-test functions while comparing the hardware directly with the simulated overhead. He reported virtually no noticeable delay and described the response speed as close to that of the actual aircraft.
The buttons and switches were fully acceptable in operation, although the tactile character was not identical to the real A320. His main reservations were the glossy material and lighter switch feel—not failed inputs or slow response.
He was also impressed that push-on, push-off switch states remained understandable through their physical positions, helping the hardware retain useful state awareness during procedures.
Connect, Detect the Panel and Select the Aircraft
CAPTAIN JOE described the setup as simple: connect the A107 Pro to the PC through USB, open the Rowsfire App and allow the software to detect the panel. During the review, the Fenix A320 profile was recognized and selected for the simulator session.
The compact dimensions do not eliminate the need for planning. Because an overhead must remain above or in front of the user while staying reachable, he recommended deciding where it will be positioned. The dedicated stand used in the video made operation and setup easier.
Cold-and-Dark to Ready for Departure
The first practical test followed a recognizable A320 preparation sequence. Rather than demonstrating isolated buttons, the creator used the A107 Pro as part of an operational flow.
Power the Aircraft
External power and batteries bring the cold-and-dark aircraft to life.
Start the APU
APU fire test, master, start and bleed functions are operated physically.
Align the ADIRS
The three selectors are moved to NAV to begin position alignment.
Configure the Overhead
Fuel pumps, signs, ventilation and exterior lights complete preparation.
A Non-normal Procedure Demonstrated with Physical Controls
After departing Haneda and climbing to 26,000 feet, CAPTAIN JOE introduced a simulated Engine 2 fire in the Fenix A320. The master warning activated, the engine-fire indication appeared and the physical panel reflected the event.
He then worked through the essential response: thrust lever idle, engine master off, Engine 2 fire pushbutton pressed, Agent 1 discharged and—when the warning persisted—Agent 2 discharged. He highlighted the fire controls as especially realistic, including the illuminated discharge indications.
This sequence demonstrated the A107 Pro’s value beyond normal startup. The panel allowed a user with real A320 experience to interact physically with a non-normal procedure rather than treating the overhead as decoration.
What CAPTAIN JOE Valued
- Frequently used A320 overhead controls are well represented
- Fast response with almost no perceptible lag
- Simple USB and Rowsfire App workflow
- Useful physical practice for preflight procedures
- Detailed fire-protection controls for abnormal scenarios
- Compact footprint compared with a full-size overhead
- Reduced dependence on camera movement and mouse clicks
- Potential to build overhead-location muscle memory
Limitations He Identified
- Glossy surface differs from the real aircraft’s matte finish
- Switches are smaller and feel lighter than real A320 controls
- Most of the hydraulic section is omitted
- Some layout differences remain noticeable to a real pilot
- Users still need to plan an accessible mounting position
Realism Is Also About What the Hardware Enables
CAPTAIN JOE did not describe the A107 Pro as a full-size replica. His evaluation was more practical: the product condenses a large overhead into a compact format while retaining many controls pilots actually use during departure preparation and emergencies.
The review also gives Rowsfire clear areas to continue refining—surface finish, switch weight, layout coverage and mounting guidance. At the same time, its strongest result came from successful procedure use: a former A320 captain could power the aircraft, prepare the overhead, depart and respond to an engine fire through the physical panel.
For users building a serious Airbus setup, that transition from mouse input to physical action is the central benefit.
Rowsfire A107 Pro Review FAQ
Who reviewed the Rowsfire A107 Pro?
The panel was reviewed by Japanese aviation creator キャプテン ジョー CAPTAIN JOE, who described his experience as a former Airbus A320 captain.
Which simulator and aircraft were used?
The demonstration used the Fenix A320 in Microsoft Flight Simulator 2024.
Did the reviewer notice control lag?
He reported almost no noticeable delay while testing external power, pumps, APU, ADIRS and fire-protection controls.
Can the A107 Pro be used for engine-fire procedures?
The review demonstrated an Engine 2 fire response using the physical fire pushbutton and both extinguisher-agent controls. It is a simulation aid and not a substitute for approved professional training.
Is the A107 Pro a full-size A320 overhead replica?
No. It is a compact panel measuring approximately 40.5 × 27 cm. It represents many frequently used controls but reduces or omits some areas, most notably much of the hydraulic section.
What were the main criticisms?
The reviewer noted the glossy finish, lighter and smaller controls compared with the real aircraft, reduced hydraulic coverage and the need to plan a suitable mounting position.
Put the A320 Overhead Within Reach.
See current specifications, supported aircraft, pricing and availability on the official Rowsfire product page.

