During installation, disable your firewall and antivirus software.
Click "Allow" for all software permission requests; otherwise, the software may not install completely.
If needed, you can contact us directly to obtain the pre-extracted software package.
2. Install FSUIPC7
3. Load the Configuration File in MobiFlightConnector
Open MobiFlightConnector and load the configuration file:
For the FENIX A320 aircraft model: LoadfenixA320-MINI-DB.mcc.
For the FBW aircraft model: LoadFBW-A320-MINI-DB.mcc. Note: Download the configuration file corresponding to your aircraft model.
4. Load the Hardware Device
Load the hardware device (this only needs to be done once). The software will automatically recognize the device when opened again.
5. Launch Microsoft Flight Simulator 2020 & Connect Hardware
After launching Microsoft Flight Simulator 2020, FSUIPC7 will run automatically.
Select the FENIX A320 aircraft model, enter the game, and click "RNU" to load the hardware. You can then use the light peripheral in the game. Note: After properly installing and launching all software, hardware, and the game, a green checkmark (√) will appear in the bottom right corner. If a yellow exclamation mark appears, check whether the software is installed correctly.
6. About MobiFlightConnector
MobiFlightConnector is button-binding software between peripherals and games, featuring powerful functions for defining buttons of gaming peripherals. You can:
Check the software’s help page.
Watch tutorial videos on the official website.
Customize the hardware to support more different aircraft models for gameplay. Feel free to contact us if you need assistance. Enjoy your flight!
Special Notes: Common Issues & Solutions
1. Issue: No response when the device is plugged into the computer, or the device is not recognized properly
Solution: Connect the device to the USB port on the motherboard at the back of the host to ensure sufficient power supply for the device.
2. Issue: After all software is installed, the device fails to interact with the game (a yellow exclamation mark appears in MobiFlightConnector)
Solution: Copy the\MSFS2020-module\mobiflight-event-modulefolder from the MobiFlightConnector installation directory to your Community folder (\Community).
That’s all for the A320 overhead panel configuration guide—we hope it helps you get your setup running smoothly! If you hit any snags, leave a comment below or reach out to our support team at service@rowsfire.com.
And if you’re ready to grab a Rowsfire product, head to our official channels to shop—happy flying!
ich habe das A107 V3.1 und habe in den release Notes gesehen, dass das Panel nun auch ohne Mobiflight verwendet werden kann. Wie genau funktioniert das? Nur das starten der Rowsfire App und des Simulators reichen leider nicht aus.
Dieter
Hi Daniel, i’ve purchased A107 V3 and downloaded the A107 V3 folder, config file Rowsfire-A107 V3.0-fenixA320-Mini OVH Panel.mcc.
All looks good, connected devices, sim status, FenixA320 CFM; if i test, all lights, switches make a responce. BATT1 shows 27,0V, BATT2 shows 26.7V, but die nops BAT 1 and 2 for starting the elec don’t work. A few days befor 1 installed it (differt con fig file) for A320 fbw and everything was okay. So whats the problem for fenix ?
Thanks for help and KR dieter
Daniel
Sure — here’s the Google Drive link to the pre-extracted software package.
If the product you purchased is the A107 V3, please download the A107 V3 folder. It contains all the required software for the installation.
If you need help setting it up with the Fenix A320, just let me know — I’m happy to guide you through the steps.
https://rowsfire.com/blogs/product/rowsfire-mobiflight-configuration-file-table
Jeffrey Feingold
Hi, can you please email me the pre-extracted software package? I bought the A107 Max Overhead Panel. I downloaded Mobiflight but when I open it’s empty and I don’t know how to get the plane I want in there (the fenix A320). Thanks
SUBSCRIBE TO OUR EMAILS
Be the first to know about new collections and exclusive offers.
Well, I absolutely love the B107 overhead panel!!! It was a great addition to my setup. Every switch and knobs works except the alignment knobs are out of sync for some reason, but I can live with that. Really enjoying the on hands feeling instead using a mouse! Anyway, so glad I purchased it. Real game changer!!!!
Hi James,
Thank you so much for your amazing feedback! We are thrilled to hear that the B107 has become such a great addition to your cockpit setup.
We completely agree that physical controls provide a much more immersive experience compared with using a mouse. We are happy that you are enjoying the realistic feeling of operating the switches and knobs.
Regarding the alignment knob sync issue, please feel free to contact our support team if you need any assistance. We will be happy to help you troubleshoot it.
Thank you again for choosing Rowsfire. Enjoy your flights!
A couple of the switches don't work. They aren't programmed correctly. The left engine start switch and the APU gauge is way off. The panel light knob pulled right off, and it also just keeps spinning either way. That could be better. All in all it's pretty cool and I would recommend it if you know how to use mobiflight even better.
Hi sir,
Thank you for taking the time to share your detailed feedback. We truly appreciate both your positive comments and suggestions.
We are sorry to hear that you experienced some issues with the switches, APU gauge, and light knob. Our support team is always available to help with configuration and troubleshooting.
Please feel free to contact us with more details, and we will do our best to help resolve these issues and improve your experience.
Ich konnte es nur kurz anschließen für einen Test da ich ert am Aufbau von meinem Homecockpit bin , aber ich bin bis jetzt begeistert
Hallo Andreas,
Vielen Dank für Ihre Bewertung und Ihre Unterstützung!
Es freut uns sehr zu hören, dass Sie bereits beim ersten Test von unserem A113 begeistert sind. Wir wünschen Ihnen viel Erfolg beim Aufbau Ihres Homecockpits und hoffen, dass unser Produkt Ihnen noch mehr Realismus und Freude beim Fliegen bringt.
4 comentários
Hallo,
ich habe das A107 V3.1 und habe in den release Notes gesehen, dass das Panel nun auch ohne Mobiflight verwendet werden kann. Wie genau funktioniert das? Nur das starten der Rowsfire App und des Simulators reichen leider nicht aus.
Hi Daniel, i’ve purchased A107 V3 and downloaded the A107 V3 folder, config file Rowsfire-A107 V3.0-fenixA320-Mini OVH Panel.mcc.
All looks good, connected devices, sim status, FenixA320 CFM; if i test, all lights, switches make a responce. BATT1 shows 27,0V, BATT2 shows 26.7V, but die nops BAT 1 and 2 for starting the elec don’t work. A few days befor 1 installed it (differt con fig file) for A320 fbw and everything was okay. So whats the problem for fenix ?
Thanks for help and KR dieter
Sure — here’s the Google Drive link to the pre-extracted software package.
If the product you purchased is the A107 V3, please download the A107 V3 folder. It contains all the required software for the installation.
If you need help setting it up with the Fenix A320, just let me know — I’m happy to guide you through the steps.
https://rowsfire.com/blogs/product/rowsfire-mobiflight-configuration-file-table
Hi, can you please email me the pre-extracted software package? I bought the A107 Max Overhead Panel. I downloaded Mobiflight but when I open it’s empty and I don’t know how to get the plane I want in there (the fenix A320). Thanks