Rowsfire App

v2.7 · Stable · Free Forever

Skip MobiFlight.
Just plug in and fly.

The Rowsfire App is the plug-and-play bridge between your cockpit hardware and your flight simulator. No JSON configs. No firmware tinkering. No support forums at 2 AM. Connect your panel, launch the app, and you're flying in under 60 seconds.

60s
Setup Time
15+
Supported Panels
5
Aircraft Models
100%
Free, Always

Three steps. No engineering degree required.

Built for simmers, not coders. If you can install a flight simulator, you can install Rowsfire App.

STEP 01

Download the App

Grab the latest installer from GitHub. One file, ~30MB, signed and safe. Works on Windows 10 & 11.

STEP 02

Plug In Your Panel

Connect any Rowsfire panel via USB. The app auto-detects your hardware and loads the right config — every time.

STEP 03

Launch & Fly

Open MSFS, X-Plane, or your sim of choice. Every switch, knob, and indicator just works. That's it.

Traditional MobiFlight Setup Rowsfire App
Setup Time 30–90 minutes ~60 seconds
Config Files Manual import & calibration Auto-detect, auto-load
Learning Curve Moderate to steep Zero — just install & run
Switching Aircraft Reload profiles manually One-click profile swap
Updates Find them yourself Auto-prompt on launch

From unboxing to airborne in 90 seconds.

Watch a real Rowsfire setup go from a sealed box to a fully connected cockpit, ready to fly the Fenix A320.

Find your panel. Find your aircraft.

Rowsfire App supports a growing list of panels and aircraft. Pick a category below to check compatibility.

Panel Fenix A320 FBW A32NX ToLiss A320 FSLabs A321 Co-Pilot Mode
A107 V3 / V3.1
A107 V2
A106 V2 / V3
A105 V3.2
A105 V3.1
A105 V3
A101 V3
A103 V3
A109 V3 NEW
A111 V1
A112 V1 NEW
A112 V1.1 NEW
A113 V1 NEW
A113 V1.1 NEW
Panel PMDG 737-800 (default) PMDG 737-600/700/900 Zibo 737 (XP12) iFly 737 MAX
B107 V1
Don't see your panel listed? More aircraft coming monthly. Subscribe below for compatibility updates, or browse our full panel collection.
Browse All Panels →

The app is free. The hardware is unforgettable.

Rowsfire App pairs with our full lineup of 1:1 scale cockpit panels. These three are where most builds begin.

Common questions, answered.

Is the Rowsfire App safe to install?

Yes. The app is built and signed by the Rowsfire team and hosted on our official GitHub repository. Some Windows Defender installations may flag new releases briefly — this is a common false positive for small-publisher software. Version 1.7.1 and later includes a verified signing certificate that resolves the warning.

If you ever see a SmartScreen warning, click "More info" → "Run anyway." The source code and binaries are publicly auditable on GitHub.

Do I still need MobiFlight?

No. Rowsfire App is a standalone replacement — it does everything MobiFlight does for our hardware, with zero configuration. If you already use MobiFlight for other devices, both can coexist.

Which simulators does it support?

Microsoft Flight Simulator 2020 and 2024 (with Fenix A320, FBW A32NX, PMDG 737 full family, FSLabs A321, and iFly 737 MAX), and X-Plane 12 (with Zibo 737, FBW A320, and ToLiss A320). DCS World support is on the roadmap.

What if my panel isn't supported yet?

We add new panel and aircraft support in monthly releases. If you own a panel that's not yet listed, contact our support team — we prioritize community-requested integrations.

Does the app cost anything?

No. Rowsfire App is, and will always be, free for all Rowsfire hardware owners. No subscriptions, no in-app purchases, no premium tiers.

Does it work on macOS or Linux?

Currently Windows 10/11 only. macOS support is being evaluated based on community demand — let us know via the subscribe form below.

How do I get help with installation?

We offer 24/6 live chat, a dedicated Facebook Group of 3,000+ home cockpit builders, and 1-on-1 video support via WhatsApp. Most users are flying within 5 minutes; if you're stuck, we'll get you unstuck.

📋 Release Notes & Changelog · Click to expand all versions
v2.7
Latest Stable Release

ToLiss A320 expanded · A109 / A112 / A113 series · Input display fixes

  • Bug fix: Fixed Fenix A320 A105_V3 series where the input display failed to show "03--" during entry — the system now correctly updates character by character without requiring all four digits to be entered first
  • Bug fix: Fixed display issue where downloading A113 incorrectly showed "A113_V1.1" as the label
  • New compatibility: ToLiss A320 support added for A109_V3
  • New compatibility: ToLiss A320 support added for A112 V1 and A112 V1.1
  • New compatibility: ToLiss A320 support added for A113 V1 and A113 V1.1
  • Note: This update was driven by community feedback — our engineering team investigated, implemented fixes, and shipped the update overnight. Thank you for your continued reports and trust.
v2.6
Superseded by v2.7

FBW A320 expanded · ToLiss A320 A111 · Fenix A320 display fix

  • Bug fix: Fixed Fenix A320 A105_V3.2 where the display was incorrectly turning on/off when affected by ground power
  • New compatibility: FBW A32NX support added for A111 V1, A112 V1, A112 V1.1, A113 V1, A113 V1.1
  • New compatibility: ToLiss A320 support added for A111 V1
  • Note — FBW A320 A111 known limitations: No indicator lights for HF1, HF2, AM; HF1_CALL / HF2_CALL / INT / MECH.CAB / ATT potentiometers and button displays are ineffective; RAD rotary switch, RESET button, PA potentiometer and button displays are ineffective
  • Note — FBW A320 A112 / A112_V1.1 known limitations: GAIN and TILT potentiometer displays are ineffective
  • Note — ToLiss A320 A111 known limitations: VHF3_CALL button and indicator light; VOICE, RESET, PA buttons and indicator lights are not supported
v2.5 · Alpha
Test build (superseded by v2.6)

FSLabs A321 + ToLiss expansion · PMDG 737 switch fixes

  • Bug fix: Fixed PMDG 737 middle switch positions for Packs, Dome Light, and Isolation Valve that couldn't be written correctly — also resolves related abnormal switch behaviors
  • New compatibility: A107 V2 / V3 / V3.1 on FSLabs A321
  • New compatibility: A101_V3 and A106 V2 / V3 on ToLiss A320
v2.4
May 19, 2026

PMDG 737 full family support · ToLiss A320 (A107_V3) · Config corruption fix

  • New compatibility: PMDG 737-600 / 700 / 900 and all variants (HUD edition, cargo version, etc.) — B107 V1
  • New compatibility: A107_V3 / V3.1 on ToLiss A320 (X-Plane 12)
  • Fixed: Applying patches could corrupt the Config files and WASM folder for some users
v2.3
May 12, 2026

New panel versions · B107 PMDG fix · Multi-device stability

  • New compatibility: A105 V3.2 (Fenix A320), A112 V1.1 (Fenix A320), A113 V1.1 (Fenix A320)
  • Fixed B107 V1 PMDG: "DIM" three-position dip switch was operating in reverse
  • Fixed occasional device drop-off when running multiple panels simultaneously
  • Resolves switch-reverse issue affecting A112 V1.1, A113 V1.1, and A105 V3.2 — re-flash firmware after updating
  • Power note: If A111 + A112 + A113 are all connected to the same USB hub, consider separating them — overload may cause one device to disconnect.
v2.2
April 26, 2026

iFly 737 MAX support · B107 Zibo bug fixes

  • Added iFly 737 MAX compatibility for B107 V1
  • Added ToLiss A320 support for A105 V3.1
  • Fixed ATTEND button in Zibo 737 causing severe lag and repeated command triggers
  • Fixed Zibo 737 ground power (GPU) switch — animation now triggers correct game function
  • Note: B107_V1 requires re-downloading firmware for this update
v2.1
April 17, 2026

Major B107 / Zibo 737 fixes (13 issues resolved)

  • Fixed ATTEND button causing severe game lag in Zibo 737
  • Fixed APU-related switches and ground power (GPU) functionality
  • Fixed FLT ALT and LAND ALT knob rotation direction
  • Fixed TRIM AIR switch mapping (was incorrectly controlling Voice Recorder)
  • Fixed FASTEN BELTS, No Smoking sign, navigation panel switch logic
  • Improved three-position switch initial states and protective covers
  • Note: Requires re-downloading B107_V1 firmware
v2.0
April 3, 2026

Auto-update system, X-Plane 12 / Zibo support

  • Added B107_V1 + Zibo 737 on X-Plane 12
  • Added A109_V3 + FBW A32NX
  • Fixed A103_V3 APU button indicator
  • Fixed EXTPWR double-press issue on A106/A107
  • One-click "RUN" — no manual scan needed after firmware download
v1.9
March 17, 2026

Co-pilot mode + B107 initial support

  • Auto-assignment for two A111 panels (Captain / First Officer based on COM port)
  • Added A106_V3 and B107_V1 support
  • Fixed multiple FBW A320 indicator and switch issues
  • Selectable potentiometer functionality for A109_V3
v1.8
February 12, 2026

Stability improvements

Background performance optimizations and connection stability fixes.

v1.7.1
February 2, 2026

Resolved Windows Defender false-positive

Code-signing certificate added to eliminate antivirus warnings on install.

v1.7
January 30, 2026

A109 and A111 Panel compatibility

v1.6 · Beta
January 23, 2026

A101 / A103 support, MSFS dual-version fix

  • Added A101_V3 (Fenix A320 & FBW A320)
  • Added A103_V3 (Fenix A320)
  • Fixed dual-bridge install when both MSFS 2020 and 2024 are present
  • Optimized A107_V3 potentiometer latency
v1.5.1
January 23, 2026

A105_V3 support + critical bug fixes

  • Fixed A107_V3 / A105_V3.1 backlight adjustment
  • Fixed STBY/AUTO/ON transponder switch in Fenix A320
  • Fixed FBW A320 APU AVAIL indicator
Newsletter

Get 12% off your first order.

Plus first dibs on new panel launches, exclusive early-bird discounts, build guides, and behind-the-scenes content. No spam, ever.

  • 12% welcome discount on your first order
  • New panel launch alerts
  • Exclusive promo codes & flash sales

By subscribing you agree to our privacy policy. Unsubscribe anytime.