Rowsfire App shows “No device detected”? Quick fix guide

أبريل 10, 2026 Daniel W

Issue

When opening the Rowsfire App, it shows that no Rowsfire device is detected.

This usually happens in the following cases:

First-time setup of a new device
USB/COM port is occupied by other software

Cause

The device ships with a MobiFlight region-locked firmware by default.
To enable proper recognition in the app, a one-time firmware upload is required.

In some cases, detection may also fail if the communication port is already in use.

Solution

Close any software that may be using the COM/USB port
Connect the device via USB and open the Rowsfire App
Go to the Upload page
Select the correct port and matching device firmware
Click Upload and wait for the process to complete

Important

The firmware only needs to be uploaded once
After successful upload, the device will be automatically recognized in future uses

Back to Product Questions

75%

(231)

15%

(45)

(20)

(4)

(6)

266

Out of the box the board looks the part. Installation of knobs and covers took some time but it is all fun and makes you get up and close and personal with your new shiny board.
Software installation with the Rows fire app was easy once you know what you are doing but big disappointment the app only works with PMDG 737-800..very specific..I have all of PMDG 737, but no luck with the 600, 700, or 900. Not happy.
so on to Mobiflight and again more learning curves with that one if you have not used it before. But alas onse up and running, low and behold all PMDG 737 versions work like a charm. Have not tried the pmdg 777 yet.
I have had no chance so far to try it in a normal flight, I know people have complained about the Panel light knob just goes round and round and yes it does but it also dims the light just fine.
Do I reccommend? yes I do if you dont mind spend some hard earned cash.

I love my B107. I would give it 5 stars if there were not any problems. Right of the box the panel display knob spins 360 degrees with little if no adjustment at all. The background illumination is very dim or even sometimes it is normal. One of the first things I do once Zibo has loaded is to max out the display in the sim. I then load the Rowsfire app for the B107. In your video of the EGT the needle goes up to 8 which match the sim. On my board the gauge only goes up to 6 and almost returns to zero. I have tried many times calibrate through the Rowsfire app, but I have now learned now to live with it and just watch the gauge in the sim. Overall quality of the build is excellent. I cannot believe how heavy the board is. It is just the petty things that drive me crazy and for the price of the board I would think it would not have these issues. Whomever performed QC did not know what they were supposed to check or the boards would have never been shipped. Might seem trivial to Rowsfire but it is a major source of concern for anyone who bought the B107.

The b107 is the best part of my simulator.
Rowsfire Good Job❤️❤️🌟🌟

Installation was a hurdle. Could not get rowsfire app to work so had to use mobiflight. No smoking hasn’t worked for me but I don’t care for it. Outside of that, this elevated my flight sim experience to FL390. It has been really fun and immersive. For a launch product, I feel I got great quality especially for that price.

Absolutely fantastic works great really enjoying it. Hope Rowsfire make more Boeing B737 stuff like radio and transponder units like they do for the airbus

1 2 3

Rowsfire App shows “No device detected”? Quick fix guide

Issue

Cause

Solution

Important

You may also like

Rowsfire B107 B737 Overhead Panel In Depth Review by Flight Streamer

She Holds the Altitude. Seven Women Who Command the Sky.

Invitation to FlightSimExpo 2026 USA

Let customers speak for us

Issue

Cause

Solution

Important

SUBSCRIBE TO OUR EMAILS

Be the first to know about new collections and exclusive offers .

You may also like

Let customers speak for us

Be the first to know about new collections and exclusive offers.